?Phew, I?ve not gained anything!?: Aren?t you relieved whenever your bathroom scales show that? เพรสเชอร์เกจ ? but actually your bathrooms scales don?t measure your bodyweight directly. Instead, the strain cell built into it converts the weight force into a path. In many industrial applications, bending beams and shear beams are often used for such measurements.
Background: How is weight measured?
Whether your bathroom scales, a finely calibrated laboratory balance or the gravimetric level monitor of a silo: In all cases, these are measuring instruments that determine a mass. As a rule, they gauge the weight force occurring. But unlike, for example, a beam balance or a spring balance, the load cells useful for this determine the weight force indirectly. For this function, these force transducers convert the weight force right into a path.
The principle: In the strain cell, the weight force deforms an integral spring or a bending beam. The intensity of this deformation then gives information regarding your weight, for example (more precisely about your bodyweight force). And with that, in addition, it answers the question of whether it is possible to still order a dessert or just start thinking about a diet.
The ?core? of bending beams and shear beams
The different design stages of force transducers in weighing technology: shear beam, bending beam, single-point and S force transducer.
How can pressure gauge octa determine how far the measuring bodies of a bending beam or shear beam load cell deform? At this point special strain gauges or thin-film sensors enter into play. These are mounted on or mounted in the measuring bodies. In the measurement process, they become a mechanical intermediate stage.
Example of strain gauges: They are glued to the measuring body. If the measuring body deforms, that is transferred to any risk of strain gauges. These convert the elastic deformations proportionally into electrical signals. Such changes in resistance could be easily and very accurately measured: with a measurement accuracy of between 0.01 % and 0.05 % Fnom. The calibration is made in grams, kilograms or tons.
As an alternative to these glued foil strain gauges, you can find force transducers with welded-in thin-film sensors: a technology that the WIKA Group excels in sufficient reason for which, in the field of force measurement, it is the only supplier that you can buy. The thin-film technology supplies a consistently high quality, an exact measurement directly in the force flow, excellent temperature characteristics and a higher long-term stability. With bending beams and shear beams, the standardised sensor is welded in to the measuring element utilizing a laser, which enables automated series production.
Application fields for bending beams and shear beams
Bending beams and shear beams are employed in weighing technology to determine the weight of small and medium-sized vessels and so are also frequently used in effect measurement. In agricultural engineering, for instance, such load cells are generally encountered: for example, when weighing livestock, dosing animal feedstuff, in gravimetric level monitoring of vessels and silos or for weighing straw or hay bales directly in the baling press.
But additionally beyond these fields of application, bending beams and shear beams can be utilized in a wide selection of other ways: for instance, in traditional weighing machine construction, platform weighing (platform scales), weighing in process and dosing systems, vessel scales, crane scales and truck scales. Specifically, in applications in the building materials industry, the chemical industry, the food industry and medical technology, bending beams and shear beams tend to be installed.
Practical example: Level monitoring with bending beam or shear beam load cells
Checking fill levels by measuring the weight of the vessel and contents: The filling height of a vessel or tank can be calculated from the measured data of the gravimetric level monitoring. This measurement method offers a number of advantages:
Level and the exact mass could be measured at the same time.
Access to the tank or vessel is not needed (this eliminates connection with the medium).
The measurement is independent of the material, its properties and the geometry of the container.
The bending beam or shear beam can be easily replaced if necessary.
In level measurement, the load cells must function whatever the nature and condition of the media. Liquid or solid, aggressive, conductive or non-conductive, forming foam or dust, steaming, hot or cold, with small or large grain size, whatever the geometry of the vessel and whether the medium in the vessel is evenly or unevenly distributed: Such factors should never affect the measuring result and the permanent function. This applies in temperature-critical applications and where robustness and high durability are needed ? for example in the steel industry.
Shear beams and bending beams in the agricultural industry
In another practical example, stainless steel sparkles too: In the agricultural industry bending beams for weighing have become much popular. When sowing or fertilising, for instance, lots of money can be saved through the precise distribution of the products. The basis for this, as is definitely the case with automation, are exact measured values, which is why high-precision shear beams (which may also be insensitive to side loads) are perfectly suited.
Bending beams, shear beams along with other load cells: versatile problem solvers
Bending and shear beams are among the most popular load cells. With regards to the field of application, you can find other force transducers which you can use. Our program includes load cells created for ranges between 0.3 kg and 300 t.
Single point load cells. These are used in weighing technology for platform scales with smaller and medium sizes. They are also referred to as ?single points? and are also ideal for eccentric load introductions.
Compression force load cells. Exactly like heavy-duty load cells, they’re tailored to the weighing of medium and large vessels and silos. The force introduction is just as easy because the installation; furthermore, the look is robust.
Tension/compression force load cells. They are mainly used for weighing suspended loads. Measurement is manufactured directly in the force path; furthermore, the installation is uncomplicated.
Note
Further information on the product range for force measurement, e.g. our bending beams and shear beams, are available on the WIKA website.
See also our article
Load pins: Definition and application areas